Cable Connections; Connect Cpus; Figure 7- Connect Each Cpu Using A Hdusbvext-Xx-Mm Cable - NTI RACKMUX-V17-N-8USBHDU Installation Manual

Rackmount kvm drawer with built-in high density usb kvm switch and kvm on ip

Hide thumbs Also See for RACKMUX-V17-N-8USBHDU:

Table of Contents

NTI RACKMUX-V17-N-8USBHD-IP RACKMOUNT DRAWER WITH USB KVM SWITCH AND KVM ON IP

CABLE CONNECTIONS

1. For each CPU:

 Connect a USB type A cable end of a HDUSBVEXT-xx-MM cable to a USB type A female user device port on a CPU.

 Connect the 15HD blue male cable end of a HDUSBVEXT-xx-MM cable to the video port of the same CPU.

 Connect the 15HD yellow male cable end of the HDUSBVEXT-xx-MM cable to a yellow "CPU x" port on the USB KVM

switch. (See Figure 7)

2. Power-ON the CPUs.

 The CPUs can be powered at any time although if a CPU needs a keyboard and/or mouse at power-ON it should be

powered after connecting to and powering-ON the RACKMUX.

Note: The order in which the CPUs and switch are powered up does not matter. A power strip can be used.

3. Power-ON the RACKMUX. (The RACKMUX can be powered at any time.)

Table of Contents