NTI RACKMUX-4K17-N-16HD4K RACKMOUNT DRAWER WITH 4K VIDEO USB KVM SWITCH
CABLE CONNECTIONS
Connect Video Sources
1. Connect each of the HDMI video sources to the ports on UNIMUX marked "HDMI Inx" (x = 1-16).
2. Connect the power cord to the AC input and plug it in.
3. Press the switch to power the RACKMUX ON. In approximately 40 seconds the UNIMUX will boot up and be ready to use.
4. The RACKMUX keyboard provides keyboard control of the OSD menu of the UNIMUX. The UNIMUX supports transparent
USB device connection such that the keyboard and touchpad mouse will also control the keyboard and mouse functions on any
connected PC.
5. For each video source that is a PC, connect a USB2-AB-0-5M-5T cable (sold separately) between a USB type A female user
device port on a CPU and a USB Type B female port on the SPLITMUX.
Figure 7- Connect each CPU and video source
6. Power-ON the video sources and CPUs.
The CPUs can be powered at any time although if a CPU needs a keyboard and/or mouse at power-ON it should be
powered after connecting to and powering-ON the RACKMUX.
Note: The order in which the CPUs and switch are powered up does not matter. A power strip can be used.
7. Power-ON the RACKMUX. (The RACKMUX can be powered at any time.)
6
Need help?
Do you have a question about the RACKMUX Series and is the answer not in the manual?