Connect Power; Power Up; Figure 11- Connect The Power Cord - NTI RACKMUX Series Installation And Operation Manual

Rackmount drawer with 4k video lcd monitor, usb keyboard, and mouse

Hide thumbs Also See for RACKMUX Series:

Table of Contents

NTI RACKMUX-4K17 RACKMOUNT 4K LCD MONITOR WITH KEYBOARD AND MOUSE

Connect Power

Connect the IEC power cord to the power port as shown below.

Power up the RACKMUX and connected computer in this order.

Power On the RACKMUX

Power ON the attached CPU.

If a device is plugged into the USB port on the front of the RACKMUX, it can powered-ON at any time.

Note: During power-up, do not attempt to type or otherwise use the keyboard. Doing so may result in boot errors and

loss of keyboard and mouse.

Table of Contents

Rackmux-4k17-n