Section 6 Startup; Configure The Instrument - Hach TitraLab KF1000 Series User Manual

Section 6

6.1 Configure the instrument

Startup
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the
personal protective equipment appropriate to the chemicals that are handled. Refer to the
current safety data sheets (MSDS/SDS) for safety protocols.
Personal injury hazard. Never use the instrument without the syringe cover installed.
1. From the home screen, select Settings. Refer also to
2. Select an option, then push Select.
Option Description
Applications Changes (refer to
copies, exports and removes application data. Make sure that the
duplication function does not make more than five applications.
Operators Adds, changes and removes operators.
Date + Time Sets the instrument date and time.
Brightness Sets the brightness of the display.
Sounds Sets the sound options.
Language Sets the language.
Network Give a name to the instrument. If a printer is connected, this name is
printed on the hard-copy output. Restart the instrument if the name is
changed.
Info Shows information about the instrument and the attached hardware.
Restore Sets the instrument to the default configuration. The restored settings are:
Defaults
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C A U T I O N
C A U T I O N
Change the application settings
The language is set to English
All password security is removed
The security password is set to 0000
No sound on: Key press, Information and Analysis results OK
Sound on: Instrument ready, Instrument switch off, Errors and
Analysis results not OK
The application parameters view is set to basic mode
Sets the syringe to empty when the instrument is set to off
The temperature display unit is set to °C
No automatic cell conditioning
No automatic cell levelling
No print of the measurement curve
No balance is connected
The default stirring is set to 10%
The user is set to "Default user"
Menu structure on page 22.
on page 35), makes
25