Hach TitraLab KF1000 Series User Manual page 51

Error/Warning
Exporting {application name} -
access forbidden to the
applications folder on USB flash
drive
Exporting {application name} -
read only access to the
applications folder on USB flash
drive
Exporting {application name} -
error during writing. Verify USB
flash drive is not full
USB flash drive is not installed.
Install and export applications
again
Application {application name}:
maximum number of applications
is reached
Application {application name}:
requires at least one titrant that
cannot be installed
Application {application name}:
requires too many titrants for this
instrument model configuration
Error while saving application
{application name}
Unable to read applications from
device. Applications have been
removed, please load them from
USB flash drive
Application {application name}
corrupted
Application {application name}
incompatible with hardware
Application {application name}
(too new model)
Table 10 USB storage device
Description
Error when exporting data to the
USB storage device
The USB storage device is read only Unlock the storage device or use another one
Error when exporting data to the
USB storage device
The instrument cannot find a USB
storage device
The maximum number of
applications for each line has been
reached when copying applications
to the instrument from the USB
storage device
The titrant needed by the application
cannot be installed on the instrument
because the applications currently
installed use another titrant
The instrument has a single syringe
and the application needs a two
syringe instrument
Error when copying from the USB
storage device to the instrument
memory
While updating the application tiles
on the display, an installed
application has been detected as
corrupt
The selected application file is
invalid
The hardware does not support the
application
This selection is not allowed
because the instrument software
only supports older application files
Possible solution
Make sure that the USB storage device is correctly
installed and the USB icon can be seen in the
header bar (refer to Table 3
Remove the USB storage device and make sure
the USB icon is no longer seen in the header bar,
then install the device again and make sure that
the icon can be seen (refer to
Make sure that the USB storage device has
enough available space or use another one
Make sure that the USB storage device is correctly
installed and the USB icon can be seen in the
header bar (refer to Table 3
Remove the USB storage device and make sure
the USB icon is no longer seen in the header bar,
then install the device again and make sure that
the icon can be seen (refer to
Remove any unwanted applications, then push the
Home key to return to the home screen. Remove
the USB storage device and make sure the USB
icon is no longer seen in the header bar, then
install the device again and import the new
application again
Remove all installed applications, then push the
Home key to return to the home screen. Remove
the USB storage device and make sure the USB
icon is no longer seen in the header bar, then
install the device again and import the new
application again
Change to a two syringe instrument
Contact technical support
Remove the corrupt application and try to load it
again
Try to load the original application file again, or
contact technical support for a replacement file
Change to a compatible instrument
Update the instrument software
Troubleshooting
on page 22)
Table 3 on page 22)
on page 22)
Table 3 on page 22)
49