Tab. 3. Flail knives applicable in mowers KBRP and Kangu
Flail knives
KNIFE TYPE I
Application: grass,
shrub, stalks, remnants
after trimming, stubbles
KNIFE TYPE II
Application: grass,
shoots, stalks, shrubs,
remnants after
trimming, hay
KNIFE TYPE III
Application:
grass, shoots, stalks,
shrubs, remnants after
trimming, hay
KNIFE TYPE IV
Application:
grass, shoots, stalks,
shrubs, remnants after
trimming, hay
KNIFE TYPE V
Application:
grass, stubbles,
branches, shrubs
4. SAFETY PRECAUTIONS
4.1. Safety rules and regulations
Front axis of the tractor should be balanced to enable its steering. If necessary, use front wheel
❑
weights.
In order to keep steering conditions, make sure that impact on the front axis is at least 20% of
❑
the complete impact on the tractor.
❑
The machine cannot be used if the tractor has not been properly balanced,
Any operation with the hydraulic lift lever should be done from the operator's seat; never
❑
operate the lever from outside of the tractor.
For tractors equipped with EHR, control with hydraulic lift is done with a button located outside
❑
the tractor's cabin. When operating, please exercise particular caution.
When mounting the machine on a tractor, risk of wounding is likely. It is recommended that
❑
operator wears protective gloves.
Use PTO shaft with CE marking.
❑
Operating manual
- 7 -
Rear- side flail mowers on a pantograph
KBRP ; Kangu
KBRP
Standard
Option
Option
Option
−
Kangu
−
Option
Option
(Kangu 190)
Option
Standard