Digital Tie Trunk Example - Avaya S8700 Installing Manual

168 Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Installing and Wiring Telephones
Install cross-connect jumpers to connect the pins from the tie trunk circuit pack to the
3
appropriate leads on the external tie trunk.
''Analog Tie Trunk Wiring'' on page 168
4
another media gateway tie trunk. Names of the tie trunk leads must be determined from
the manufacturer or supplier of the external trunk circuit.
Administer on the Trunk Group screen on Avaya Site Administration. Refer to the
5
Administrator's Guide for Avaya™ Communication Manager for more details.
Analog Tie Trunk Wiring
Figure notes
1

Digital Tie Trunk Example

This example shows how to connect digital tie trunk wiring from one media gateway to another
one or any other Avaya configuration.
connections.
Install cross-connect jumpers to connect the pins from the digital trunk circuit pack to
1
appropriate pins on the manufacturer's or supplier's external digital trunk.
Set option switches on the port circuit pack (Digital Trunk).
2
3 Refer to the Job Aid entitled
Administer on the DS1 and Trunk Group screens through ASA. Refer to the
4
Administrator's Guide for Avaya™ Communication Manager for more details.
T.1
R.1
T1.1
R1.1
E.1
M.1
External Trunk or Adapter
shows a media gateway tie trunk connected to
26
1
27
2
28
3
tie_wire RBP 071796
2 Tie Trunk Circuit Pack (Position 1C05)
''Digital Tie Trunk Wiring'' on page 169
Option Switch Settings
May 2003
29 T.2
4 R.2
30 T1.2
R1.2
5
31 E.2
6 M.2
shows the
for detailed information.