Software Problems - GCC Technologies Jaguar V Series User Manual

6.4

Software Problems

Check the following first:
Does your software package indicate that it will work with
your computer and cutting plotter?
Does your software support HP-GL and HP-GL/2 drivers?
(* check the configuration settings of your software.)
Yes
Does the cutting plotter interface
match the requirements of your
software?
Yes
Does your
software
recommend
using a different
cable?
Yes
Try using the
recommende
d cable.
Re-power on the
cutting plotter and
try to send the file
again.
Trouble Shooting
No
Refer to Chapter
2 - Connecting
your cutting
plotter.
No
Does the software
vendor provide a
sample file?
Yes
Do something about the
error message display on
LCM, or consult your
software vendor.
No
Most well known cutting softwares
in the world have drivers for our
cutting plotters.
software that has HP-GL and
HP-GL/2 emulation supports and
you can chose the following three
drivers:
A3 size: HP7475A

A1 size: HP7580A

A0 size: HP Draf Pro Exl or

HP Draf Master
No
6-4
Jaguar V User Manual
If not, use