GCC Technologies Jaguar V Series User Manual page 13

Step 2

It is recommended to assemble the stand by at least 2 people to prevent damages from
dropping components onto the ground.

Installation procedure:
1. Fasten 2 sets of side stand
2. Fasten with Stand Beam
A

Please pay attention to the direction of the base beam (the wheel on the front end of the
beam comes with a break while the rear one is on its own).
Front
Figure2.2- 4
Installation
A and Stand Base
by supplied screws.
B
A
B H
H
Figure 2.2-2
H by supplied screws.
Figure2.2- 5
2-3
Jaguar V User Manual
Figure 2.2-3
Rear