GCC Technologies Jaguar V Series User Manual page 39

Image Scale To adjust the image scale of media length and width that may
Length cause by the thickness of the media.
The Numerator is the ideal length, and the Denominator is
the actual length measured from the resultant.
For example, cutting a line with 500.0 mm length. The
procedure as follows:
Image Scale
1. Press the [LEFT ARROW] to choose the Numerator and
Width
select 500.0 mm,
2. Cut the length by sending a graph file,
3. Measure the length then use the [RIGHT ARROW] key to
choose the Denominator, then
4. Press [UP ARROW /DOWN ARROW] to change the
values of the actual length.
Scale Length Fixed scaling, for maintenance only.
Scale Width
The Control Panel 3-9
Jaguar V User Manual
500/500
mm