Step 5
Draw out paper from upper side of the paper roll, then go through the plotter to the front
side. Make sure paper is loaded on center of the platen before press down Lever (Pinch
Roller). (Figure 4-4 & 4-5)
Step 6
Fix paper on the front shaft by twin adhesive tape (Figure 4-6).
Step 7
Place the two dancer bars
(Detailed composition refer to Figure 2-1)
Operation
Draw out paper from upper
side of the roll.
Figure 4-4
【Figure 4-4】
D
Figure 4-6
【Figure 4-6】
into the dancer guiders
4-2
Jaguar V User Manual
Figure 4-5
【Figure 4-5】
G
. (Figure 4-7)
G
Figure 4-7
【Figure 4-7】