GCC Technologies Jaguar V Series User Manual page 50

4.9 How to set die/kiss cut through plug-in software for Adobe Illustrator
and CorelDraw
Die/kiss cut function allows you to define two cutting parameter in one cutting line, you can set
through plug-in software for Adobe Illustrator and CorelDraw directly instead driver setting by
designate the line to green color RGB 255 and then set the length and force from the control
panel.
1. Select an outline that you want to do die/kiss cut in working area.
2. Change the color to green color code RGB 255 then click "OK"
(Note: Only green color code RGB 255 is identified as die/kiss cut function, please don't
select other color otherwise the function cannot work)
Operation
Figure 4-27
4-11
Jaguar V User Manual
Figure 4-28