Advertisement
STEP 3: Use a screwdriver to press down and firmly turn screw clockwise until it begins to slip indicating
the barrel has crimped against inside of drywall. Back out and completely remove Screw, leaving
bolt/anchor in wall. Position Bracket (F), align holes, replace and tighten Screw.
STEP 4: With Bracket (F) firmly attached to wall, carefully lift Desk (E) and engage cleat on back with
Bracket as illustrated below. Gently push/pull down until Desk is fully seated and locked in place.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Barrel
Turn screw until it slips
(F)
Remove screw
(E)
Page 4 of 6
Advertisement
