Advertisement
Quick Links
PRODUCT NAME: Gallery Wall System
ITEM NUMBER: WE026
ASSEMBLED DIMENSIONS : 73 1/2"H x 64"W x 1 1/4"D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 6-3-2021
Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA
Page 1 of 5
Advertisement
Related Manuals for Ballard Designs WE026
Summary of Contents for Ballard Designs WE026
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Gallery Wall System ITEM NUMBER: WE026 ASSEMBLED DIMENSIONS : 73 1/2”H x 64”W x 1 1/4”D Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete.
-
Page 2: Required Tools
Maximum support provided when one Bracket is centered on a Wall Stud. REQUIRED TOOLS: Ltr. Qty. Hardware Included Phillips Screwdriver, Small Hammer, Level, Pencil Screws Remove all parts, hardware and Wall Anchors protective packaging from carton and carefully arrange on a clean, level, padded surface. -
Page 3: Installation Tip
Use Wall Anchors in open drywall. Do not use when wall stud is present. INSTALLING SCREW-TYPE WALL ANCHORS Fig. 3 Mark location. Use pointed tool to make a very small pilot hole. Gently tap tip of Anchor into pilot hole then use a screwdriver and turn it in until flush with wall surface. - Page 4 STEP 3: Finial(s) (D) must be removed from Rod (C) before Rod Hooks (E) may be added. Orient each Rod Hook as illustrated and gently slide toward center of Rod. Replace Finial(s) when complete. NOTE: Remove and install Finial by gently pulling out or pushing in. STEP 4: Carefully hang each Chain (G) from each Rod Hook (E).
- Page 5 How to Create a Template for Keyhole Brackets Place a strip of Painter’s Tape over both Keyholes on back of item to be hung. Use a Screwdriver or other pointed tool to punch a hole in tape at TOP of each Keyhole. PAINTER’S TAPE OF KEYHOLE Use a Level and Pencil to mark wall at installation location.