Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ballard Designs WS956
Summary of Contents for Ballard Designs WS956
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Valet Shelf with Rod 24”or 48“ ITEM NUMBER: WS956 ASSEMBLED DIMENSIONS: 8 1/4”H x 24”W or 48”W x 14”D PRODUCTS ARE NOT INTENDED MADE IN INDONESIA FOR COMMERCIAL USE. UPDATED: 10/30/2019 Page 1 of 5...
- Page 2 Ltr. Qty. Hardware Included REQUIRED TOOLS: Phillips screwdriver, Anchor level, pencil and a power drill. -Two person assembly suggested NOTE: When unpacking, lay Long Screw the parts on a padded surface such as the packaging provided. Be sure to locate all hardware Short Screw before throwing away any packaging.
- Page 3 STEP 1: Position Brackets (G) on wall in desired location and mark screw holes with a pencil. (SEE NOTE BELOW) Make sure marks are level. FOR MAXIMUM SUPPORT AT LEAST ONE BRACKET SHOULD BE MOUNTED INTO A WALL STUD. For screw holes not positioned over wall studs, drill pilot holes and use Anchors (A). Using a screwdriver, secure Brackets to wall by screwing in the Long Screws (B) through Brackets and into stud, or through Brackets and into Anchors.
- Page 4 STEP 3: Attach Finials (I) by screwing onto end of the Rod (H). Rotate clockwise until tight. STEP 4: Lock Rod (H) into place by inserting the Set Screws (D) into openings in back of Holders . Tighten with Allen Wrench (E). Customer Service: 800-367-2810 Page 4 of 5 Online: www.ballarddesigns.com...
- Page 5 STEP 5: Place Shelf (F) on Brackets (G). Using a screwdriver, screw Short Screws (C) through Brackets and into Shelf to secure it in place. Customer Service: 800-367-2810 Page 5 of 5 Online: www.ballarddesigns.com...
Need help?
Do you have a question about the WS956 and is the answer not in the manual?
Questions and answers