Related Manuals for Ballard Designs WS994
Summary of Contents for Ballard Designs WS994
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Jewelry Mirror ITEM NUMBER: WS994 ASSEMBLED DIMENSIONS : 60”H x 24”W x 5”D PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. UPDATED: 1-19-2022 Page 1 of 4...
- Page 2 Assemble in location for intended use. Prevent accidentally discarding small parts or hardware. Ltr. Qty. Hardware Included Retain all carton contents until assembly and installation are complete. Wood Screws (For use when Wall Stud is REQUIRED TOOLS: present or with Wall Anchor) Phillips Screwdriver, Level, Pencil, Expansion Bolts Drill with 1/4”...
- Page 3 STEP 1: Determine location for Jewelry Mirror (D), locate Wall Stud(s) inside wall. Use a Level and Pencil to position then mark wall for Cleat. Best support provided by driving Wood Screw (A) directly into a Wall Stud. Expansion Bolts (B) provide best support where not Wall Stud is present. Wall Anchors (C) are used when one Screw in Cleat is anchored to a Wall Stud or an Expansion Bolt.
- Page 4 WOOD SCREWS Wood Screws provide optimal support when driven directly into a Wall Stud. If installation point is over a Wall Stud, drive Wood Screw directly into Stud. DO NOT USE WOOD SCREWS IN OPEN DRYWALL. SCREWS WILL PULL OUT OF WALL. INSTALLING EXPANSION BOLTS Drywall 1/4”...
Need help?
Do you have a question about the WS994 and is the answer not in the manual?
Questions and answers