The safety precautions listed in this handbook and all other generally recognised regula- tions on safety must be observed at all times. For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk...
Page 4
SPECIFICATIONS / MAIN FEATURES Code Engine Briggs & Stratton Engine type Series 650 2750 rpm Unleaded petrol 1.4 litres Oil type SAE 30 engine oil Oil sump capacity 0.57 litres Cutting width 457mm Cutting height 13 - 70mm 1285 x 535 x 960mm Weight 33kg Decal - Height of Cut...
Never mow while people, especially children, or pets are nearby. Replace faulty silencers. Always replace worn or faulty parts with genuine Hayter parts. Keep in mind that the user is responsible for accidents or hazards occurring to other people or their property.
SAFETY PRECAUTIONS Allow the engine to cool before storing in any enclosure. Operation cont Stop the engine and disconnect the spark plug lead: - Before clearing blockages. Always ensure the blade has stopped, by releasing the engine stop lever, before tilting the mower for transport- chine.
Remove the mower from the packaging and check that ‘Maintenance Schedule’. the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. Check Oil Level the mower on a level surface, unscrew and remove the Handlebar and remove it to check the oil level.
OPERATING THE MOWER Controls Reverse Travel Height Of Cut Operate all control levers several times and ensure that Hold and pull against the handlebar with both hands to Move the height of cut lever sideways to disengage it the cables move freely. Check that the engine stop lever from the locking notch, then push forwards to lower or reverse the mower.
OPERATING THE MOWER Heavy Growth prevent the engine overloading. Be prepared to make two cuts when the grass is long. To prevent damage to your lawn do not remove more than one third of grass height in one cut. Cutterblade Operation to this machine.
MAINTENANCE SCHEDULE 50 Hours Or Every Season Maintenance Schedule Change the engine oil. Follow the hourly or calendar intervals, whichever occurs 100 Hours Or Every Season prolonged periods under dusty, dry conditions, or when - Clean the engine cooling system. Clean more often under dusty conditions or when airborne debris is cutting tall, dry grass.
We recommended that this service be carried curely tighten the screw to the base. out by an authorised Hayter Service dealer. and thereafter according to the ‘Maintenance Schedule’:- Spark Plug Service Deck Housing 1.
DO NOT rotate tools towards the cutting (Refer engine. This will distribute the oil and help prevent engine edges to avoid the risk of injury should the tool slip. corrosion. ALWAYS use genuine Hayter replacement parts. Item No. Description Part No. Qty Blade 2779...
Page 13
MOWER MAINTENANCE Storage Continued - Clean grass and debris from the engine cylinder, cylin- exhaust/exhaust guard. - Lubricate the mower and treat metal parts with a water repellent anti-corrosion product. - Cover the mower with a protective sheet and store it in a dry, ventilated area.
LAWN CARE CALENDAR To be used as a guide only January June October There is very little work to do this month apart from Summer mowing should now be under way. It should be Rake out the thatch from the turf and spike the lawn to brushing away leaves.
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Discharge chute blocks 1. Grass is wet 1. Mow dry grass 1. Engine stop lever released 1. Operate engine stop lever Engine will not turn over 3. Obstruction under deck 3.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does not cover minor mechanical adjustments unless they are due to defective material or workmanship.
Page 20
SERIAL NO. 1st Y ear (12 months ) 1st Y ear (12 months ) Owner ’s Name : We certify t hat this service h as been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Engine Type:-...