Related Manuals for Hayter Harrier 41 Push
Summary of Contents for Hayter Harrier 41 Push
- Page 1 Harrier 41 Push Code374A OWNER’S HANDBOOK Original Version (EN) From Serial Number: 400000000 & Up Issued: 13/03/2017 Part number: 134-0110 Rev B...
-
Page 3: Table Of Contents
CONTENTS Introduction Non Grassed Areas Height of Cut General Safety Grassbag Product Features Collection Without Grassbag Product Specifi cation Heavy Growth Safety Symbols Friction Disc Safety Precautions 7 - 8 Mower Maintenance 13 - 16 Safety Alert Symbol Engine Detail Training Carburetor Adjustments Preparation... -
Page 4: Introduction
Hayter Limited reserves the right to amend product specifi cations without prior notifi cation. For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk... -
Page 5: Product Features
PRODUCT OVERVIEW SPECIFICATION Code 374A Model Harrier 41 Push Petrol Rotary Mower Weight 34 kg Length 1440 mm Width 485 mm Height 1040 mm Width of Cut 410 mm Height of Cut 13 - 60 mm Cutterblade Speed 2750 rpm Engine Briggs &... -
Page 6: Safety Symbols
Please ensure all Safety Decals are secured on the mower before using the product. If any of the decals are missing or not secure, do not use the mower, contact your local Hayter authorised dealer for replacements. WARNING: Improper maintenance, use of non conforming spare parts, or the removal or modifi cation of the Safety Decals may cause death or serious injury. -
Page 7: Safety Precautions
Adjusting the cutting height may bring you into contact with the familiar with the controls and the proper use of the equipment. be replaced immediately with a genuine Hayter replacement moving cutter blade, causing serious injury. Learn how to stop the mower quickly in an emergency. -
Page 8: Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the equipment Do not tilt the mower when starting the engine. For Spare Part numbers, please refer to the Hayter Parts List. is in safe operating condition. Do not start the engine if standing in front of the discharge chute. -
Page 9: Assembling The Mower Before First Use
(1) into the grassbag (2), ensuring that the handle is the oil fi ll area is clear of debris. missing, contact your local Hayter dealer. above the grassbag as shown. Attach plastic clips (A), (B), (C) and (D) to the grassbag frame. -
Page 10: Operating The Mower
OPERATING THE MOWER Fuel Type high altitude adjustment is not recommended. Starting Fuel must meet these requirements: Fill to base of neck to allow for fuel expansion. Do not overfi ll Stand behind the mower and hold the handle together with the •... -
Page 11: Forward Travel
OPERATING THE MOWER Forward Travel disconnect the spark plug lead. defl ector to rest against the rear of the mower. (Refer fi g.10) Hold and push against the handle with both hands to move the To empty the grassbag, pour out the grass clippings and shake mower forwards. -
Page 12: Heavy Growth
OPERATING THE MOWER Heavy Growth Areas of heavy growth should be mown without collecting the clippings. If collection is required, fi rst mow the area without the grassbag at the maximum height of cut setting. Allow the grass clippings to dry out and then mow the area at the maximum height of cut setting with the grassbag fi... -
Page 13: Mower Maintenance
Refi ll with new oil of the recommended SAE viscosity to change the engine speed detailed in the Specifi cation section. grade. Refer to Assembling the Mower Before First Use. If any adjustments are required contact your Hayter Authorised Service Dealer for service. Air Filter Service... -
Page 14: Spark Plug Service
We recommend that (Refer fi g.23) Use only Briggs & Stratton spark tester 19368 (1) to check for a this service be carried out by an authorised Hayter Service spark as shown in the diagram. Dealer. -
Page 15: Securing Nuts & Bolts
DO NOT Lubrication rotate tools towards the cutting edges to avoid the risk of injury should the tool slip. ALWAYS use genuine Hayter Lubricate the wheels, pivot points and linkages with engine oil replacement parts. -
Page 16: Cutterblade Sharpening
MOWER MAINTENANCE Cutterblade Sharpening To store the handle, unscrew the 2 small securing knobs dry, ventilated area. suffi ciently to allow it to be pivoted forwards to rest against the A slightly worn cutterblade may be re-sharpened. Both blade mower. edges must be sharpened equally to ensure balance. -
Page 17: Maintenance Schedule
MAINTENANCE SCHEDULE Follow the hourly or calendar intervals, whichever occurs fi rst. More frequent service will be required if working for prolonged periods under dusty, dry conditions, when airborne debris is present or after extensive operation cutting tall, dry grass. First 5 Hours •... -
Page 18: Lawn Care Calendar
LAWN CARE CALENDAR To be used as a guide only January August There is very little work to do this month apart from brushing away leaves. Keep off the grass if Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a frozen or waterlogged. -
Page 19: Trouble Shooting
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Engine stop lever released Operate engine stop lever Mounting bolt loose Tighten bolt Engine will not turn Incorrect oil level Check oil level Cutterblade bolt loose Tighten bolt Engine vibrates over excessively Obstruction under deck... -
Page 20: Warranty
Lifetime Deck Warranty Hayter Limited warrants to the original purchaser that the mower deck, consisting of the die cast structure to which the engine is secured, will not crack or break during normal use for the lifetime of the product. If such damage occurs Toro shall, at our option, repair or replace the mower deck at no cost. Deck failure due to misuse or abuse and corrosion occurring due to lack of regular maintenance are not covered. -
Page 21: Eu Privacy Statement
Hayter dealer. Your personal information will be processed by Hayter in the UK. It will also be entered into the Toro warranty system, which is hosted on servers located within the United States where privacy law may not provide the same protection as applies in your country. - Page 22 NOTES NOTES...
-
Page 24: Service Records & Customer Information
We certify that this service has been carried out by an been carried out by an been carried out by an been carried out by an Authorised Hayter Service Authorised Hayter Service Authorised Hayter Service Authorised Hayter Service Dealer Dealer...