Removing The Mower From Storage - Hayter Harrier 48 Autodrive VS ES IS Operator's Manual

STORAGE

Removing the Mower from Storage

• Check and tighten all fasteners.
• Check the battery gauge and charge if required.
Refer to Before Operation - How to Charge the
Battery Pack.
• Install the electric start button.
• Remove the spark plug and spin the engine
rapidly, by holding the engine stop lever against
the handle, followed by pushing the electric start
button, to blow the excess oil from the cylinder.
• Install the spark plug and tighten it with a torque
wrench to 20 N·m (15 ft-lb).
• Perform any maintenance procedures; refer to
Maintenance.
• Check the engine-oil level; refer to Checking the
Engine-Oil Level.
• Fill the fuel tank with fresh fuel; refer to Filling the
Fuel Tank.
• Connect the wire to the spark plug.
26