Summary of Contents for Hayter Harrier 41 Autodrive ES VS
Page 1
Harrier 41 Autodrive ES VS Code 376A OWNER’S HANDBOOK Original Version (EN) From Serial Number: 400103512 and Up Issued: 07/03/2017 Part number: 134-0112 Rev B...
CONTENTS Introduction Before Mowing Electric Start General Safety Forward Travel Product Overview Reverse Travel Product Specifi cation Parking Turning Safety Symbols Stopping Height of Cut Safety Precautions 8 - 10 Non Grassed Areas Safety Alert Symbol Grassbag Training Collection Without Grassbag Preparation Heavy Growth Operation...
Page 4
CONTENTS Mower Maintenance continued Cutterblade Removal Cutterblade Assembly Cutterblade Sharpening Blade Brake Test Storage Battery Specifi cation Battery Fuel Gauge When to Charge the Battery Pack How to Charge the Battery Pack Battery Pack and Charger Storage Battery Disposal Directive Lithium-Ion Battery Pack Disposal Maintenance Schedule Lawn Care Calendar...
Hayter Limited reserves the right to amend product specifi cations without prior notifi cation. For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk...
PRODUCT OVERVIEW PRODUCT SPECIFICATION Code 376A Model Harrier 41 Autodrive VS Petrol Rotary Mower Weight 38 kg Length 1440 mm Width 485 mm Height 1040 mm Width of Cut 410 mm Height of Cut 13 - 60 mm Cutterblade Speed 2750 rpm (±100 tpm) Engine Briggs &...
Please ensure all Safety Decals are secured on the mower before using the product. If any of the decals are missing or not secure, do not use the mower, contact your local Hayter authorised dealer for replacements. WARNING: Improper maintenance, use of non-conforming spare parts, or the removal or modifi cation of the Safety Decals may cause death or serious injury.
Learn how to stop the mower quickly in an emergency. part. cause a hazard when disassembled and re-assembled, this maintenance should only be carried out by a Hayter authorised Never allow children or people unfamiliar with these instructions Do not tamper with or disable the mower safety systems, sealed dealer.
Do not put hands or feet near or under rotating parts. For Spare Part numbers, please refer to the Hayter Parts List. Inspect the exhaust periodically and replace if worn or leaking. Never pick up, carry the mower or lift the rear defl ector whilst Do not add lubricant or grease to the plastic rear roller bearings.
SAFETY PRECAUTIONS Charging the Battery Pack dropped, or otherwise damaged in any way. If charger is damaged it must be replaced. Charger is not serviceable. WARNING: Improper use of the battery and charger • Do not disassemble charger; or attempt to service. can result in an electrical shock, fi...
(Refer fi g.4) following items have been supplied correctly. If any items are Tighten both handle knobs to secure in position. missing, contact your local Hayter dealer. (Refer fi g.2) Check Oil Level Engine Handbook...
OPERATING THE MOWER First Time Battery Charging octane/85 AKI (89 RON) petrol is acceptable. Before Mowing Remove the terminal strip from the battery before inserting For carbureted engines, high altitude adjustment is required to To prevent accidents, thoroughly inspect the area and into the charger for the fi...
OPERATING THE MOWER Forward Travel downward pressure on the handle to raise the front wheels just grass is long. above ground level and steer in the required direction. (Refer fi g.12) Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction.
OPERATING THE MOWER Grassbag until the required fi nish is obtained. Raise the rear defl ector, lift the grassbag and lower the rear To prevent damage to your lawn do not remove more than one defl ector to rest against the rear of the mower. third of grass height in one cut.
Do not tamper with the governor spring, linkages, or other parts grade. Refer to Assembling the Mower Before First Use. to change the engine speed detailed in the Specifi cation section. If any adjustments are required contact your Hayter Authorised Service Dealer for service. Air Filter Service...
We recommend that (Refer fi g.24) death or serious injury. this service be carried out by an authorised Hayter Service Dealer. 2. Turn the water on. Use only Briggs & Stratton spark tester 19368 (1) to check for a spark as shown in the diagram.
Lubrication the rear defl ector may cause death or serious injury. injury should the tool slip. ALWAYS use genuine Hayter replacement parts. Lubricate the wheels, pivot points and linkages with engine oil Remove grass debris from the rear defl...
• Disconnect the spark plug lead. A slightly worn cutterblade may be re-sharpened. Both blade the engine stop lever, contact an Authorised Hayter Service • Change the engine oil. edges must be sharpened equally to ensure balance. Sharpen Dealer.
MOWER MAINTENANCE cause severe burns. Battery Specifi cation temperature* is reached it will automatically start charging. The Lithium-Ion battery pack was partially charged before *Refer to Battery Specifi cation. Lithium-Ion Battery shipment. To maintain charge and to prevent damage while in Lithium-Ion Battery Pack 10.8 V (10,8 V) storage, the battery pack is programmed to enter a “sleep mode”.
MOWER MAINTENANCE Battery Pack and Charger Storage • Recycling keeps these products out of the municipal waste stream. When not in use, disconnect the battery and store in a cool, dry • The crossed-out bin symbol is a reminder to follow these area.
MAINTENANCE SCHEDULE Follow the hourly or calendar intervals, whichever occurs fi rst. 100 Hours Or Every Season More frequent service will be required if working for prolonged periods under dusty, dry conditions, • Clean the engine cooling system. Clean more often under dusty conditions or when airborne when airborne debris is present or after extensive operation cutting tall, dry grass.
LAWN CARE CALENDAR To be used as a guide only January August There is very little work to do this month apart from brushing away leaves. Keep off the grass if Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a frozen or waterlogged.
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Engine stop lever released Operate engine stop lever Mounting bolt loose Tighten bolt Engine will not turn Incorrect oil level Check oil level Cutterblade bolt loose Tighten bolt Engine vibrates over excessively Obstruction under deck...
Lifetime Deck Warranty Hayter Limited warrants to the original purchaser that the mower deck, consisting of the die cast structure to which the engine is secured, will not crack or break during normal use for the lifetime of the product. If such damage occurs Toro shall, at our option, repair or replace the mower deck at no cost. Deck failure due to misuse or abuse and corrosion occurring due to lack of regular maintenance are not covered.
Hayter dealer. Your personal information will be processed by Hayter in the UK. It will also be entered into the Toro warranty system, which is hosted on servers located within the United States where privacy law may not provide the same protection as applies in your country.
We certify that this service has been carried out by an been carried out by an been carried out by an been carried out by an Authorised Hayter Service Authorised Hayter Service Authorised Hayter Service Authorised Hayter Service Dealer Dealer...