DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
20.
Install a suitable, 120 Ltr/min (32 gal/min) flow me-
ter between the pressure and return quick release
couplers.
21.
Ensure load valve on flow meter is fully 'Open'.
22.
Start the engine and run at high idle.
23.
Activate the threshing mechanism and operate the
drum variator.
24.
Gradually adjust load on the flow meter to a pressure
of 100 bar (1450 psi).
25.
If a flow of 114 ltr/min (30 gal/min) is recorded the
pump flow is satisfactory.
2 4/7/2006
A.10.A / 70
7
BSC1340A
8
BSC1340A_4