DISTRIBUTION SYSTEMS - SECONDARY HYDRAULIC POWER SYSTEM
Valve block - Install (A.12.A.45 - F.10.A.15)
1.
Install the O rings between the gearbox and manifold
block mating surfaces.
Install the low-pressure manifold onto the top of the
gearbox. Install and tighten the four cap screws (1).
Torque the cap screws to 28 N·m (21 lb.ft.).
2.
Connect the wire connector (1) to the pressure sen-
sor (2).
3.
Connect the hydraulic lines (1) and tighten the fittings
(2).
2 4/7/2006
A.12.A / 23
1
BSC1322
2
40012177_995
3
40012177_996