New Holland CX720 Repair Manual page 167

19. Remove the wrist pin (1) from the piston (2).
20. Separate the connecting rod (1) from the piston (2).
IMPORTANT: Note the orientation of the piston to the con-
necting rod by observing the stampings on the crown of the
piston in relation to the connecting rod.
21. Inspection
Clean all parts in a suitable solvent and allow to air
dry.
22. Inspect all parts for wear or damage. Repair or re-
place as necessary.
23. Inspect crankshaft journals for burrs,
scratches and wear marks.
is evident, replace the crankshaft.
24. Inspect the machined surfaces of the connecting rod
and cap for burrs, nicks, scratches and wear marks.
If wear or damage is evident, replace the connecting
rod and cap as a set.
25. Inspect the reed valve for cracks or distortion. Re-
place as necessary.
26. Inspect the piston and cylinder for wear or damage.
Replace as necessary.
DISTRIBUTION SYSTEMS - PNEUMATIC SYSTEM
nicks,
If wear or damage
2 4/7/2006
A.20.A / 15
19
20014964
20
20014965