DISTRIBUTION SYSTEMS - SECONDARY HYDRAULIC POWER SYSTEM
Hydraulic pump - Test (A.12.A.20 - F.40.C.01)
1.
Attach 0-40 bar (0-600 psi) gauge 293242 to the test
port located in the low pressure block on the gear-
box using tube 292246 and quick release coupling
291924.
2.
Start the engine and set engine speed to high idle.
3.
The gauge should indicate 25 bar (362 psi). This is
the regulated pressure.
2 4/7/2006
A.12.A / 19
1
BSC1331A