New Holland CX720 Repair Manual page 271

Rotary Screen Brush Actuator - M27
1. EN W/H, Connector X206 - Brush Actuator
ENGINE COMPARTMENT, IVECO CURSOR ONLY
NOTE: The Iveco engine, is equipped with two engine harnesses. One harness is supplied by Iveco, and is installed
when the engine is assembled, and connects engine-specific sensors to the engine control unit (ECU). Not all these
sensors or connectors are labeled in the schematic, as they are used only for engine management.
NOTE: The other harness is supplied by New Holland, and is installed when the engine is installed in the combine.
In some cases, there may be open connectors on the Iveco harness, due to some Iveco sensors being removed and
New Holland sensors being installed, which are connected to the NH harness.
Engine Oil Pressure Sensor - B30
1. EN W/H, Connector X201 - Engine Oil Pressure
2. Engine Oil Pressure Switch - Iveco ECU Use Only
Front of Engine
1. EN W/H, Connector X202, Air Filter
DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM
75
50014693
76
10004648
77
10010912
2 4/7/2006
A.30.A / 91