10.
Loosen and remove the four end cap screws (1). If
necessary, use an impact driver (2).
11.
Remove the end cap (1) from the compressor. Re-
move and discard the crankshaft seal (2) and O ring
(3) from the end cap.
12.
Loosen and remove the four bolts (1) from the end
cover (2).
Remove the end cover (2) from the compressor.
DISTRIBUTION SYSTEMS - PNEUMATIC SYSTEM
2 4/7/2006
A.20.A / 12
10
20013219
11
20013222
12
20013220