SPARE PARTS
Only use original NEW HOLLAND spare parts bearing the logo shown below.
Only genuine spare parts guarantee the same quality, duration and safety as original parts, as they are the same
parts that are assembled during standard production. Only NEW HOLLAND genuine spare parts can offer this
guarantee. When ordering spare parts, always provide the following information:
Machine model (commercial name) and serial number
•
part number of the ordered part, which can be found in the "Microfiches" or the "Spare Parts Catalogue", used
•
for order processing
TOOLS
The tools that NEW HOLLAND suggests and illustrate in this manual have been:
specifically researched and designed for use with NEW HOLLAND machines
•
essential for reliable repair operations
•
accurately built and rigorously tested so as to offer efficient and long-lasting operation
•
By using these tools, Repair Personnel will benefit from:
operating in optimal technical conditions
•
obtaining the best results
•
saving time and effort
•
working in safe conditions
•
NOTE: Wear limit values indicated for certain parts should be considered to be recommended, but not binding. The
terms "front", "rear", "right-hand" and "left-hand" (when referred to different parts) are determined from the rear, facing
in the direction of travel of the machine during operation.
INTRODUCTION
1
geninfo_03
604_34_001_06 2 4/7/2006
6