Commissioning; Avoiding Image Sticking; Check For Pixel Defects - Eizo CuratOR EX5841 Installation Manual

2 Commissioning

Note
Factory settings
All monitors are optimally preset in the factory, such that changes are not usually required.

2.1 Avoiding image sticking

Image sticking may occur with LCD monitors. Image sticking is an effect whereby a faint im-
age of the previous screen contents can be seen after the display contents have changed.
The following measures can reduce or prevent image sticking:
• Use a screen saver with regularly changing images
• Switch off the monitor when it is no longer needed.
• The monitor has an energy saving mode:
If the application in use supports the energy saving mode, activate it.
Note
Energy saving (Power Management)
The monitor supports various energy saving settings, called Power Management (PM).
When PM is active, the monitor backlight switches off automatically for example, if the
monitor is without a video signal for an extended period.
Also observe the operating system manufacturer's instructions regarding power manage-
ment settings.

2.2 Check for pixel defects

Pixel defects (small bright or dark dots) can occur in LCD monitors. During the manufactur-
ing process, all monitors are checked for the permitted number of defective pixels.
Defective pixels cannot be corrected.
CuratOR EX5841
Installation Manual, 08/2019
Commissioning
2.1 Avoiding image sticking
5