Preset" Key; Display Menu - Eizo CuratOR EX5841 Installation Manual

Commissioning

2.5 "Preset" key

2.5 "Preset" key
Use the "Preset" key on the control panel to open the menu for selecting a preset.
Function Values
Presets Open Factory Presets Select one of the eight factory presets for operation.
Open User Presets
Up to eight presets can be stored in the monitor. The video input, input range, the LUT
used, and optionally the OSD position are stored.

2.6 Display menu

Function
Mode Presets
8
Description
See also Factory Preset
Select one of the eight user presets for operation.
Values
"0" or "1" per LUT
Default: "1" for every
LUT.
[} 22].
Description
Setting the Mode Preset
This function enables you to make any LUT set-
tings in the "CAL Switch" function selectable (1)
or non-selectable (0).
The names of the selectable LUT settings are
taken from the "CAL Switch" function.
Note: The active LUT cannot be set to "0".
Installation Manual, 08/2019
CuratOR EX5841