Table of Contents
Advertisement
EPSON Perfection4180 Photo
6.1 Overview
This chapter explains the maintenance work necessary to keep this product in the best
condition and to prevent problems.
6.1.1 Cleaning
Clean the outside of the product with a neutral detergent, and clean its inside with a
vacuum cleaner. Special care must be taken when cleaning the Document Glass since it
affects the quality of image scanning. If it is dirty, wipe it with a clean, soft and dry
cloth.
Never use organic solvents, such as thinner and benzene, because they
C A U T I O N
may deteriorate or degrade the plastic and rubber parts.
Exterior
After wetting a clean cloth with water and then completely squeezing water out of
it, wipe the exterior with that close. If the exterior is extremely dirty, wipe it with a
cloth moistened with a small amount of detergent.
Document Glass
Clean it with a clean, dry cloth. When the Document Glass is especially dirty or
has foreign matter on its surface, wipe it with a cloth moistened with a small
amount of pure water. If the Document Glass has traces of wiping after cleaning,
completely wipe it with a dry, clean cloth again.
Scanner inside
Before reinstall the Upper Housing after it had been removed, make sure to
remove the dust inside of the scanner and the Upper Housing. Squirt them with
plenty of air.
MAINTENANCE
Overview
Revision A
55
Advertisement
Table of Contents
