Table of Contents
Advertisement
EPSON Perfection4180 Photo
7.6.4.2 Disassembly of Feed Roller Assembly
1.
Remove the two hooks that are used to install the Feed Roller Cover to the Feed Roller
Assembly.
2.
Remove the two Hooks that are used to install the Feed Roller Assembly to the Frame
part in the circumference of the Feed Roller Assembly shaft hole.
3.
Remove the Feed Roller Assembly.
Before reinstalling the ASF Hopper Assembly to the Feed
C H E C K
Roller Assemblies, set and temporarily secure the Compression
P O I N T
Springs 1.66 to the Spring Mounting Hooks of the Feed
Assembly. After assembling, move the Feed Roller Assemblies
to the hole positions in the rear of the ASF Frame, and release
the Compression Springs 1.66 from the temporarily securing
Hooks through the holes.
Do not touch the roller surface of the Feed Roller Assembly.
Feed Roller Assembly
Securing Hooks
Figure 7-36. Feed Roller Assembly Removal Hook Position
APPENDIX
Feed Roller Cover
ADF; Disassembly
Feed Roller
Cover
Feed Roller Assembly
Feed Assembly (left/right)
When assembling, set the
"Compression Spring 1.66" to
the spring mounting part of the
Feed Assembly, and engage the
bend of the Spring on the Hook
to secure it as shown in the
figure.
Figure 7-37. Disassembly of Feed Roller Assembly
Revision A
Compression
Spring 1.66
87
Advertisement
Table of Contents
