Table of Contents
Advertisement
EPSON Perfection4180 Photo
5.1 Overview
This section explains the adjustment required when this product is disassembled.
5.1.1 Adjusting jig
The adjusting jig of this product is as indicated below.
Table 5-1. Adjusting Jig
Name
Part Code
Torsion Coil Spring
5.1.2 Adjustment item
The adjustment item necessary for this product is as indicated below.
Table 5-2. Adjustment Item
Adjustment Item
Adjustment of Motor Tension Belt
tension
ADJUSTMENT
Description
1265487
Tension Spring
Condition
When the Motor Tension Belt is removed or
loosened
5.1.3 Adjustment method
5.1.3.1 Motor Tension Belt tension adjustment
1.
Press the Pulley against the Motor Tension Belt, and temporarily fit the Tensioner.
2.
Install the Torsion Coil Spring as shown in
tension.
Motor Tension Belt
Figure 5-1. Tension Adjustment
After adjustment, remove the Torsion Coil Spring without fail.
C A U T I O N
Overview
Revision A
Figure 5-1
to secure the Tensioner under
Pulley
Tensioner
Torsion Coil Spring
53
Advertisement
Table of Contents
