Table of Contents
Advertisement
EPSON Perfection4180 Photo
3.
Remove the seven screws (five (CBP, M3x8), two (CBP, M3x10)) that are securing the
TPU Unit.
4.
With a flat-blade screwdriver, release the eight hooks that are securing the TPU Unit,
and remove the TPU Inverter Unit.
When reinstalling the TPU Inverter Unit, insert the Stopper of the
TPU Unit Cable into the Socket.
DISASSEMBLY/ASSEMBLY
Stopper
Socket
Hooks
Disassembly Procedure
Tightening torque 6-9kgfcm
M3x8
Tightening torque 6-8kgfcm
Figure 4-31. Removal of TPU Inverter Unit
Revision A
M3x10
49
Advertisement
Table of Contents
