Table of Contents
Advertisement
EPSON Perfection4180 Photo
7.6.2.2 Gear Frame
1.
Release the Locks of the two Bushings (white plastic parts on both sides).
2.
Remove the Roller Shaft (front).
3.
Insert and push a flat-blade screwdriver into the gap shown below. Push up the White
Reference Plate forcibly in the direction of an arrow to disengage the Hook.
Release Locks of Bushings (white).
Figure 7-14. Roller Removal 1
APPENDIX
White Reference Plate
Figure 7-16. White Reference Plate Removal 1
ADF; Disassembly
Remove Roller Shaft (front).
Figure 7-15. Roller Removal 2
Push up forcibly in this
direction to disengage Hook.
It is recommended to insert
and push flat-blade
screwdriver into this gap.
Revision A
77
Advertisement
Table of Contents
