Operation
1
1. Cooling water inlet
EMU40712
Procedure for shallow water cruising
1.
Move the remote control lever to the
neutral position.
2.
Push the "
" (up) side of the power trim
and tilt switch to tilt the outboard motor
up slightly to the desired position.
WARNING! Using the power trim and
tilt switch on the bottom cowling
70
ZMU06942
N
ZMU07034
N
ZMU06926
while the boat is moving or engine is
on could increase the risk of falling
overboard and could distract the op-
erator, increasing the risk of collision
with another boat or an obstacle.
[EWM01851]
1
UP
1. Power trim and tilt switch
3.
To return the outboard motor to the nor-
mal running position, push the "
(down) side of the power trim and tilt
switch to tilt the outboard motor down
slowly.
DN
1
1. Power trim and tilt switch
EMU28196
Cruising in other conditions
Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged. Also rinse the
ZMU06986
"
ZMU06987