Operation
3.
To return the outboard motor to the nor-
mal running position, press the power
trim and tilt switch and slowly tilt the out-
board motor down.
EMU35390
Cruising in other conditions
Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged. Also rinse the
outside of the outboard motor with fresh wa-
ter and, if possible, rinse the power head un-
der the cowling.
Cruising in acidic water
Water in some areas can be acidic. After op-
erating in such water, flush the cooling pas-
sages with fresh water to prevent corrosion.
Also rinse the outside of the outboard motor
with fresh water.
47