Throttle Friction Adjuster - Yamaha VF200 Owner's Manual

ther forward or reverse, push the free accel-
erator button and move the remote control
lever.
35˚
2
3
1. Free accelerator button
2. Fully closed
3. Fully open
2
3
1. Free accelerator button
2. Fully closed
3. Fully open
TIP:
The free accelerator button can only be

pushed when the remote control lever is in
the neutral position.
After the button is pushed, the throttle be-

gins to open after the remote control lever
is moved at least 35.
After using the free accelerator, return the

remote control lever to the neutral position.
The free accelerator button will return au-
N
1
ZMU07028
N
1
ZMU06903
tomatically to its set position. The remote
control will then engage forward and re-
verse normally.
EMU40606

Throttle friction adjuster

The throttle friction adjuster can be used to
adjust the resistance to movement of the re-
mote control lever, and can be set according
to operator preference. Adjust the throttle
friction according to the following procedure.
1. Remove the cap.
1
1. Cap
1
1. Cap
2. To increase resistance, turn the adjuster
clockwise. To decrease resistance, turn
the adjuster
WARNING! Do not overtighten the
friction adjuster. If there is too much
resistance, it could be difficult to
Components
ZMU07025
ZMU06904
counterclockwise.
29