Fuel Flow Meter; Fuel Consumption Meter / Fuel Economy Meter / Twin Engine Speed Synchronizer - Yamaha VF200 Owner's Manual

Instruments and indicators
1
3

1. Fuel flow meter

2. Fuel consumption meter / Fuel economy
meter / Twin engine speed synchronizer
3. Water separator-alert indicator (operates
only if the sensor has been installed)
All segments of the display will light momen-
tarily after the main switch is turned on and
will return to normal thereafter.
EMU26753
Fuel flow meter
The fuel flow meter displays the amount of
fuel flow over a one-hour period, at the cur-
rent rate of engine operation.
The fuel flow meter displays gallons/hour

or liters/hour according to operator prefer-
ence. Select the desired units of measure-
ment by setting the selector switch on the
back of the gauge during installation.
1. Selector switch
The fuel consumption meter and fuel econ-

40
omy meter will indicate the same unit of
measurement.
Fuel flow readings are not accurate when the
engine is operating under about 1300 r/min.
As the fuel pump cycles on and off, the dis-
play indicates either no fuel flow or higher
flow than the actual average use.
2
Dual engine users: the fuel flow meter can
display the fuel flow of either or both engines.
ZMU01748
To change the fuel flow display, press the
" " (set) button repeatedly until the gauge
displays " " (for fuel flow to the starboard en-
gine only), " " (for fuel flow to the port engine
only), or "
gines).
EMU36091
Fuel consumption meter / Fuel
economy meter / Twin engine speed
synchronizer
The display shows either the fuel consump-
tion meter, the fuel economy meter, or the
twin engine synchronizer.
To change the display, press the "
(mode) button repeatedly until the indicator
on the face of the gauge points to "
consumption meter), "
meter), or "
chronizer).
EMU26762
Fuel consumption meter
This gauge displays the total amount of fuel
" (for total fuel flow both en-
" (fuel economy
" (twin engine speed syn-
ZMU01749
"
" (fuel