Outboard Motor; Flushing Device; Installing Top Cowling - Yamaha VF200 Owner's Manual

Operation
1
1. Oil dipstick
3. Insert the oil dipstick completely and re-
move it again.
4. Check that the oil level on the oil dipstick
is between the upper and lower marks.
Consult your Yamaha dealer if the oil
level is not at the proper level or if it ap-
pears milky or dirty.
1
1. Oil dipstick
2. Upper mark
3. Lower mark
EMU40412

Outboard motor

Check that the outboard motor is mounted

properly and check the outboard motor
mounting bolts for looseness.
Check the propeller for damage.

Check for engine oil leaks.

54
EMU36494

Flushing device

Check that the flushing device's garden hose
connector is securely screwed on to the fit-
ting on the bottom cowling. NOTICE: If the
garden hose connector is not properly
connected, cooling water can leak out
and the engine can overheat during oper-
ation.
[ECM01802]
ZMU06917
3
1. Flushing device
2. Garden hose connector
2
3. Fitting
EMU40752

Installing top cowling

1. Check the rubber seal for damage. If the
rubber seal is damaged, have it replaced
3
by a Yamaha dealer.
ZMU06918
1
2
1. Rubber seal
2. Bottom cowling
2 1
ZMU06919
ZMU06978