Editing Effect Parameters; Selecting An Effect Type - Yamaha PSR-S710 Reference Manual

Editing EFFECT Parameters

Selecting an Effect type

1
Press the [F] (TYPE) button in the EFFECT Page of the Mixing Console display.
The Effect Type Selection display is called up.
2
Use the [1 ▲▼]/[2 ▲▼] buttons to select the effect BLOCK.
Effect Effect-applicable
Block parts
REVERB All parts
CHORUS All parts
DSP1 STYLE PART,
SONG CHANNEL
1–16
DSP2, RIGHT 1, RIGHT 2,
DSP3, LEFT, SONG
DSP4 CHANNEL 1–16,
Microphone sound*
(PSR-S910)
NOTE When the "Connection" parameter of the DSP1 (selected on step 3 of "Editing and Saving the effect" section on
effect will be applied overall to the Style and Song. When it is set to "Insertion," the DSP1 effect will behave as same as other DSP blocks and be applied
to only the part(s) selected in step 3.
3
Use the [3 ▲▼]/[4 ▲▼] buttons to select the part to which you want to apply the
effect.
Please note that a part cannot be selected if the selected block is REVERB, CHORUS or DSP1.
4
Use the [5 ▲▼]/[6 ▲▼] buttons to select the effect CATEGORY.
5
Use the [7 ▲▼]/[8 ▲▼] buttons to select the effect TYPE.
If you want to edit the effect parameters, go on to the next operation.
2
Effect characteristics
Reproduces the warm ambience of playing in a concert hall or jazz
club.
Produces a rich, "fat" sound as if several parts are being played
simultaneously. In addition, other type effects (such as reverb, delay,
etc.) can also be selected in this effect block.
This effect is applied only to Style/Song parts.
Any unused DSP blocks are automatically assigned to the appropri-
ate parts (channels) as needed. One DSP block is available only for
one of the keyboard parts or Song parts.
* Handled only by DSP4.
3 4 5
page 76) is set to "System," the DSP1
PSR-S910/S710 Reference Manual
8
75