Xilinx ZCU102 Manual page 16

Maxim PowerTool
Once the engineer is satisfied that values are loaded, the
"Store User ALL" button in the Dashboard tab will store
configuration in the NVM (non-volatile memory) of each device
– A warning message will appear, and warn you that the MAX20751 has a limited
number of write cycles remaining
– You should press "cancel", and it will avoid updating the MAX20751
– Why? The supplied XML file only addresses the MAX15303 devices, so no need to
waste a write cycle for the MAX20751 on this board
IMPORTANT: Do not power off the board
Page 16
© Copyright 2016 Xilinx
.