Troubleshooting Table; Problems With Operation - Hanseatic WQP12-7609H User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
Only authorised specialists may re-
■
pair the dishwasher. If in doubt, con-
tact our service team for this (see see
EN-30).
Only carry out the actions which are
■
described in this user manual.
Never repair defective dishwashers –
■
or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent us-
ers.

Problems with operation

Problem Possible cause
The dishwash- The mains plug has not been
er cannot be inserted into a socket.
switched on.
There is no voltage being
supplied through the socket.
The selected The dishwasher's door is not
dishwasher pro- closed properly.
gramme will not
The water tap is not properly
start or it stops.
on.
The inlet hose is defective.
There is a risk of overflowing.
The electrical water stop sys-
tem has been activated.
Troubleshooting table
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
If water overfl ows, close the water
■
supply immediately and do this be-
fore contacting the service team (see
see EN-30).
If the water has overfl owed, remove
■
any water standing in the dishwasher
before restarting a programme.
Solution
Connect the mains plug to the socket.
Check the fuse. Check the socket by con-
necting another device.
Close the dishwasher door.
Turn the water tap on completely.
Contact our service team (see see EN-30).
Page EN-27