Table of Contents
Advertisement
4.2 Access via Web Browser
Purpose:
You can get access to the device via web browser. You may use one of the following listed web
browsers: Internet Explorer 6.0, Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0,
Internet Explorer 10.0, Apple Safari, Mozilla Firefox, and Google Chrome. The supported
resolutions include 1024*768 and above.
Before you start:
Obtain the device IP address via SADP software. Refer to the user manual for the detailed steps of
obtain online device and modify device network parameters via SADP software.
Step 1 Open web browser, enter the IP address of the device and then press Enter.
Step 2 Log in the device.
If the device has not been activated, you need to activate the device first before login.
1) Enter the same password in Password and Confirm.
2) Click OK to activate and log in the device.
Education Sharing System
Figure 4-2 Connect via a Switch or a Router
Figure 4-3 Set Admin Password
14
Advertisement
Table of Contents
