bintec elmeg GmbH
Chapter 2 bintec H2 Automotive+
2.1 Introduction
This manual explains how to install and connect the bintec H2 Automotive+ router.
bintec H2 Automotive+
Fig. 1:
2.1.1 Power supply
For further information on the bintec H2 Automotive+ power supply, please see
2.1.2 Hardware monitoring
The LEDs on the front panel are used to monitor the hardware in the bintec H2 Automotive+. These LEDs provide
visual status information on the hardware components, indicating whether there is connectivity, data flow, etc.
For further information on said panel, please see
bintec H2 Automotive+
LEDs
on page 5.
2 bintec H2 Automotive+
Power Source
on page 9.
3