Table of Contents
Advertisement
bintec elmeg GmbH
Chapter 1 About this manual
This is the installation manual for the bintec H2 Automotive+ router. It contains instructions on how to install the
device in a working environment.
1.1 Supported devices
The information in this manual only applies to the bintec H2 Automotive+ router.
1.2 Who should read this manual?
This manual should be read by support personnel who need to install, configure, maintain and monitor the device.
1.3 When should you read this manual?
Read this guide as soon as you are ready to familiarize yourself with the device and its components.
The information contained in this manual will help you operate your device and understand its capabilities.
1.4 What is in this manual?
This installation guide contains the following:
1.5 What is not in this manual?
This manual does not contain information on the device's software and configuration. For information on how to con-
figure the device, please read the relevant protocol manuals at http://www.bintec-elmeg.com.
1.6 How is the information organized?
Each chapter focuses on a specific hardware component or part thereof. All the information about a particular com-
ponent (such as its technical specification, description, etc.) can be found in the section covering that particular com-
ponent.
1.7 Technical support
bintec elmeg GmbH offers a technical support service. Regular software upgrades are available for maintenance and
new features.
Contact information:
Web: http://www.bintec-elmeg.com
Tel. Nº: +49 - 911 - 9673 0
Fax: +49 - 911 - 688 0725
bintec H2 Automotive+
• A description of the features available on the bintec H2 Automotive+ router.
• A description of the technical specifications.
• A detailed description of the power supply requirements.
• A description of the LEDs and connectors on the device.
• Troubleshooting information.
1 About this manual
1
Advertisement
Table of Contents
