Connectors; Power Connector; Lan Connector; Wwan Connector - bintec elmeg H2 Automotive+ Installation Manual

bintec elmeg GmbH
range [192.168.1.2, 192.168.1.254] and mask 255.255.255.0. For example, 192.168.1.2, 255.255.255.0.
• Connect the IP terminal Ethernet interface to a bintec H2 Automotive+ Ethernet switch port (LAN1..4 connectors).
• Start a Telnet session from the IP terminal to IP address 192.168.1.1 ( bintec H2 Automotive+ default address).
• The default configuration does not ask for login credentials (user/password) to access the console.
For additional information on configuring your device, refer to the user manuals provided by bintec elmeg GmbH on
the documentation CD or website.
A.3 Connectors
A.3.1 POWER connector
MOLEX 2x2
A.3.2 LAN Connector
RJ45 LAN
A.3.3 WWAN Connector
The WWAN connector installed is an SMA female coaxial.
SMA Female
bintec H2 Automotive+
PIN
1
2
3
4
RJ45 PIN
1
2
3
4
5
6
7
8
PIN
Internal
External
SIGNAL
GND
VCC
IGNITION (Input)
DO (Output)
FE Signals
BI-DA+
BI-DA-
BI-DB+
--
--
BI-DB-
--
--
ANT
RF in/out
GND
Technical information
GE Signals
BI-DA+
BI-DA-
BI-DB+
BI-DC+
BI-DC-
BI-DB-
BI-DD+
BI-DD-
29