Table of Contents
Advertisement
3 Components and power supply
switch. When power is applied to the device - BATTERY (+) /VCC -, the device remains off. It will not turn on until the
ignition pin - ACC / IGNITION - sends a signal (+12 V or +24 V).
Similarly, if the ignition signal deactivates after the device has been turned on, the device will remain on for the peri-
od of time configured through the "set ignition-off-powerdown-timer <value> " command.
*
*p 4
Config>set ?
application-active
console
contact-person
data-link
default-conf
file-cfg
ftp
host-location
hostname
ignition-off-powerdown-timer
inactivity-timer
login
password
pool
schedule-restart
telnet
web-probe
Config>set ignition-off-powerdown-timer ?
<1..1440>
disabled
Config>set ignition-off-powerdown-timer 10
Config>
For further information on this command, please see the following manual: bintec Dm704-I Configuration and Monit-
oring.
Note
The Power Management feature is always enabled.
In order to disable the Power Management feature, connect the IGNITION signal to the VCC / BAT-
TERY (+). For further information see
Power cord pinout
3.4 RESET Button
The following sections describe the RESET button features.
Reset button
Fig. 11:
12
Permits you to select the code used to boot the router
Set console configuration
Assign a name or identification to the contact-person
Type of data link for a WAN line
Restores the default configuration
Configure a configuration file as active
Permits you to access the FTP configuration menu
Physical location of the router
Assign a name to a device
Configure the time to router power down after car
ignition off
Configure the maximum inactivity time
Configure login options
Configure the device access password
Number of bytes assigned to each memory pool
Allows to configure router reset schedule
Access the TELNET protocol configuration
Access the Web probe configuration
Power down timeout in minutes
Disable ignition off power down timer
on page 11
Connecting the power cable to the vehicle
bintec elmeg GmbH
on page 10 and
bintec H2 Automotive+
Advertisement
Table of Contents
