Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Headstock
A
D
Figure 1. Headstock controls.
A. Adjustable Depth Stop: Stops spindle travel
at predetermined depth.
B. Depth Scale: Indicates drilling depth and posi-
tion of depth stop.
C. Downfeed Handles: Move spindle down when
pulled down. Spindle automatically returns to top
position when released.
D. Spindle Return Spring: Automatically returns
quill into headstock.
-4-
manual
BEFORE
B
C
Table
E
Figure 2. Table controls.
E. Table Lock Handle: Locks table height and
rotation in position in relation to column.
Power and Speed Components
F
J
Figure 3. Control panel.
F. Spindle Pulley: Holds drive belt and transfers
motor power to spindle.
G. Drive Belt: Controls spindle speed.
H. Motor Pulley: Transfers motor power to drive
belt at different speeds.
I. Belt Tension Lock: Secures motor in position
to set belt tension.
J. ON/OFF Switch w/Disabling Key: Turns motor
ON when flipped up; turns motor OFF when
pressed down. Removal of yellow key disables
switch so motor cannot start.
Model G0925 (Mfd. Since 02/20)
H
G
I
Advertisement
Table of Contents
