Labels & Cosmetics - Grizzly G0925 Owner's Manual

INJURY/SHOCK
PINCH HAZARD!
Disconnect power
Always keep this
before adjustments,
cover closed during
maintenance, or
operation.
service.
104
105
REF PART # DESCRIPTION
101 P0925101 PINCH/SHOCK/ENTANGLEMENT LABEL
102 P0925102 MACHINE ID LABEL
103 P0925103 READ MANUAL/PPE LABEL
104 P0925104 GRIZZLY LOGO LABEL
105 P0925105 ELECTRICITY LABEL - SMALL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-36-
Scan QR code to visit our Parts Store.
Labels & Cosmetics
ENTANGLEMENT
HAZARD! HAZARD!
101
Tie back long hair and
remove loose clothing
to prevent getting
caught in machine.
To reduce risk of
death or serious
injury, read manual
BEFORE using
machine.
To reduce the risk of serious injury when using this machine:
1. Read and understand owner's manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid spindle entanglement. Tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Keep all guards and covers in place during operation.
7. Clamp workpiece to table to prevent rotation.
8. Avoid putting hands where they could slip into rotating bits.
9. Always remove chuck keys and other tools before starting.
10. Use correct speeds for drilling bits and workpiece material.
11. Do not expose to rain or use in wet locations.
12. Prevent unauthorized use by children or untrained users.
G0925
MODEL G0925
EYE/FACE INJURY
HAZARD!
8" BENCHTOP
Always wear safety
glasses and face
DRILL PRESS
shield when using
this machine.
103
106
108
WARNING!
107
110
REF PART #
106 P0925106
107 P0925107
108 P0925108
109 P0925109
110 P0925110
Specifications
Motor: 1/3 HP, 120V, 1-Ph, 60Hz
Swing: 8"
Spindle to Table Dist: 7-1/2"
Spindle to Base Dist: 10-13/16"
Spindle Travel: 0"–2"
Spindle Taper: JT33
Number of Spindle Speeds: 5
Spindle Speeds: 740–3140 RPM
Weight: 34 lbs.
102
109
DESCRIPTION
ELECTRICITY LABEL - LARGE
MACHINE WARNING LABEL
TOUCH-UP PAINT, GRIZZLY GREEN
TOUCH-UP PAINT, GRIZZLY BLACK
MODEL NUMBER LABEL
Model G0925 (Mfd. Since 02/20)
Date
Serial Number
Mfd. for Grizzly in China