Table of Contents
Advertisement
Assembly
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble machine:
1.
Attach column to base using (3) M8-1.25 x 20
hex bolts (see Figure 9).
Figure 9. Column attached to base.
2.
Slide table assembly onto column, centering
table over base (see Figure 10), and secure
with table lock handle.
Column
Table Lock
Handle
Figure 10. Table secured on column.
Model G0925 (Mfd. Since 02/20)
x 3
Table Assembly
3.
Lift headstock and fit it onto top of column
(see Figure 11). Rotate headstock so spindle
is over table.
Figure 11. Headstock placed on column.
4.
Tighten (2) pre-installed set screws to secure
headstock to column (see Figure 12).
Figure 12. Location of set screws that secure
headstock to column.
x 2
-15-
Advertisement
Table of Contents
